LS1012AXN7KKB
| Part Description |
ARM® Cortex®-A53 Microprocessor IC QorIQ® Layerscape 1 Core, 64-Bit 1.0GHz 211-FCLGA (9.6x9.6) |
|---|---|
| Quantity | 1,904 Available (as of October 8, 2026) |
| Product Category | Microprocessors |
|---|---|
| Part Series | LS1012A |
| Manufacturer | NXP USA Inc. |
| Manufacturing Status | Active |
| Manufacturer Standard Lead Time | 18 Weeks |
| Datasheet |
Specifications & Environmental
| Core Processor | ARM® Cortex®-A53 | Device Package | 211-FCLGA (9.6x9.6) | ECCN | 3A991A2 | ||
|---|---|---|---|---|---|---|---|
| Ethernet | GbE (2) | HTS Code | 8542.31.0001 | Moisture Sensitivity Level | 3 (168 Hours) | ||
| Mounting Method | Surface Mount | Mounting Type | Surface Mount | Number of Cores/Bus Width | 1 Core, 64-Bit | ||
| Operating Temperature | -40°C ~ 105°C | Package / Case | 211-VFLGA | RAM Controllers | DDR3L | ||
| REACH Compliance | REACH Unaffected | RoHS Compliance | ROHS3 Compliant | SATA | SATA 6Gbps (1) | ||
| Security Features | Secure Boot, TrustZone® | Speed | 1.0GHz | Supplier Device Package | 211-FCLGA (9.6×9.6) | ||
| USB | USB 2.0 (1), USB 3.0 + PHY |
Overview of LS1012AXN7KKB – IC MPU QORIQ 1.0GHz 211-FCLGA
The LS1012AXN7KKB is an NXP Semiconductors QorIQ Layerscape microprocessor integrating a single 64-bit Arm® Cortex®-A53 core running at 1.0 GHz. Designed for small form-factor, fanless embedded networking and IoT applications, it offers hardware packet acceleration, integrated peripheral interfaces and industrial operating qualification.
Targeted use cases include IoT gateways, consumer and mobile NAS, entry-level broadband Ethernet gateways and building or factory automation where compact size, security features and low typical power consumption are important.
Key Features
- Core Single Arm® Cortex®-A53 64-bit core at 1 GHz with NEON SIMD and dual-precision FPU; ECC-protected L1 and L2 caches (32 KB L1 I/D, 256 KB L2).
- Memory Integrated memory controller supporting 16-bit DDR3L devices at 1 GHz and QuadSPI/SD/MMC interfaces for boot and storage expansion.
- Networking and High-speed I/O Three-lane 6 GHz multi-protocol SerDes enabling up to two Gigabit Ethernet ports, a DMA-controlled PCI Express® Gen2 port and one SATA 6 Gbps port; includes dual USB controllers with one SuperSpeed USB 3.0 controller and integrated PHY plus a USB 2.0 controller.
- Packet Acceleration Hardware packet forwarding engine (PFE) that offloads IP packet processing from the CPU and delivers up to 2 Gbit/s IP forwarding with minimal CPU load.
- Security Integrated QorIQ Trust Architecture with Secure Boot and TrustZone® support to enable trusted system designs.
- Power and Efficiency Architected for extreme power efficiency—typical 1 W power usage is documented for Layerscape LS1012A-class devices—suitable for fanless and battery-powered applications.
- Package and Reliability 211-FCLGA package (9.6 × 9.6 mm), surface-mount construction, industrial operating temperature range of −40 °C to 105 °C and RoHS compliant.
Typical Applications
- Trust-enabled IoT Gateways — Secure boot and TrustZone® support enable trusted device identity and secure update paths for gateway designs.
- Consumer and Mobile NAS — SATA 6 Gbps and integrated networking make the device suitable for compact NAS and battery-powered mobile storage solutions.
- Entry-level Broadband Ethernet Gateways — Dual GbE ports combined with the hardware PFE support packet forwarding and NAT offload for gateway appliances.
- Building and Factory Automation — Industrial temperature qualification and compact package fit small, rugged control and monitoring systems.
- Ethernet Drives and Storage Appliances — SATA and PCIe interfaces support integration into networked storage and Ethernet-attached drive systems.
Unique Advantages
- Highly integrated communications processing: Single-chip combination of CPU, SerDes, Ethernet, SATA and USB reduces BOM and simplifies board design.
- Hardware packet offload: On-chip PFE offloads IP packet processing enabling higher throughput with lower CPU utilization and power consumption.
- Secure platform foundation: Secure Boot and TrustZone® provide a hardware-backed trust architecture for secure embedded systems.
- Compact, industrial-ready package: 211-FCLGA (9.6 × 9.6 mm) surface-mount package with −40 °C to 105 °C qualification for compact, robust designs.
- Low typical power: Designed for extreme power efficiency (noted 1 W typical for the LS1012A family), enabling fanless and battery-powered products.
- Broad ecosystem and enablement: Supported by evaluation boards, Linux BSPs and ecosystem partners to accelerate prototyping and software bring-up.
Why Choose LS1012AXN7KKB?
The LS1012AXN7KKB positions itself as a compact, power-efficient communications processor that balances compute capability with integrated networking and storage interfaces. Its single Arm® Cortex®-A53 core, packet forwarding engine and broad peripheral set make it suitable for designers who need a small-footprint processor for secure, networked embedded applications.
With industrial temperature qualification, a small 9.6 × 9.6 mm package and supplier support resources, the part is targeted at customers building compact IoT gateways, NAS devices and entry-level network appliances who require long-term supply and ecosystem enablement.
Request a quote today to receive pricing, availability and technical assistance for LS1012AXN7KKB. Submit your inquiry to get detailed procurement and lead-time information for your design.

Date Founded: 2006
Headquarters: Eindhoven, North Brabant, Netherlands
Employees: 38,000+
Revenue: $10.53 Billion
Certifications and Memberships: ISO9001:2015, IATF16949:2016