UWX0G560MCL1GB

The UWX0G560MCL1GB is a surface-mount aluminum electrolytic chip capacitor in a compact radial can package designed for board-level power decoupling and smoothing. This 56 µF, 4 V device delivers targeted performance for embedded and automotive electronics, combining a low-profile SMD form factor with AEC-Q200 and RoHS compliance.

With a rated operating range from –40°C to 85°C, a 2000-hour load life at 85°C, and carrier-tape packaging for automated assembly, the part is optimized for high-density PCB assemblies and production environments that require reliable, board-mounted bulk capacitance.

Key Features

• Capacitance & Voltage — 56 µF nominal capacitance at a 4 V rated voltage with ±20% tolerance for predictable bulk storage and decoupling on low-voltage rails.
• Electrical performance — tan δ 0.35 (maximum) measured at 120 Hz and 20°C; leakage current specified at 3 µA (per datasheet condition: after 2 minutes at 20°C, ≤ 0.01CV or 3 µA, whichever is greater).
• Ripple handling — Low-frequency ripple current 42 mA at 120 Hz and high-frequency ripple current 63 mA at 10 kHz to support transient smoothing on power rails.
• Reliability & Qualification — AEC-Q200 compliant and designed for a load life of 2000 hours at 85°C, supporting demanding application environments.
• Thermal range — Operating temperature from –40°C to 85°C for use across a wide set of embedded and automotive ambient conditions.
• Package & assembly — Chip-type radial can SMD in φ5 × 5.4 mm overall size (L: 5.4 × D: 5 mm) with embossed carrier taping for automatic pick-and-place and reflow processes; recommended PCB land size 5.3 × 5.3 mm.
• Environmental compliance — RoHS compliant to support regulatory requirements in production and end products.

Typical Applications

• Automotive electronics — Bulk decoupling and power smoothing on 4 V subsystems and control modules where AEC-Q200 qualification is required.
• DC–DC converter outputs — Local energy storage and ripple suppression for point-of-load converters and regulator outputs operating at low voltages.
• Embedded power rails — Stabilizing supply rails for microcontrollers, sensors, and mixed-signal modules in compact SMD layouts.
• Industrial control modules — Board-level filtering and transient absorption in control electronics exposed to broad temperature ranges.

Unique Advantages

• AEC-Q200 compliance: Meets automotive-grade qualification requirements, simplifying component selection for vehicle electronics and safety-related subsystems.
• Compact SMD can package: Radial chip-type can in a small footprint enables high-density PCB designs while providing electrolytic bulk capacitance.
• Production-ready assembly: Embossed carrier taping supports automatic mounting and efficient integration into high-volume assembly lines.
• Designed for extended life at elevated temperature: 2000-hour load life at 85°C provides predictable end-of-life behavior for thermal-stressed applications.
• Targeted ripple performance: Specified ripple currents at both low and high frequencies allow designers to size the part for real-world converter and regulator ripple conditions.

Why Choose UWX0G560MCL1GB?

UWX0G560MCL1GB positions itself as a compact, automotive-capable SMD electrolytic solution for engineers needing 56 µF of bulk capacitance at 4 V in space-constrained designs. Its AEC-Q200 compliance, defined leakage and tan δ characteristics, and 2000-hour life at 85°C make it suitable for production applications where reliability and predictable electrical behavior matter.

This part is well suited to designers of automotive and industrial electronics who require a board-mount electrolytic capacitor that integrates readily into automated assembly and supports low-voltage power rails with defined ripple and leakage specifications.

If you would like pricing, lead-time information, or to request a formal quote for UWX0G560MCL1GB, please submit an inquiry to our sales team and reference the part number. Representatives can provide availability, packaging options, and ordering support.