SOC50S Series – 50.0MM X 50.0MM Metal DIP CMOS OCXO
3D Product View
Features
• ±5.0ppb (Frequency Stability) Available
• Sinewave
• OCXO
• AT-Cut or SC-Cut
Applications
• Military Communication Equipment
• Base Stations
• Test Equipment
• Synthesizers
• Digital Switching
Part Number Builder
Please choose your parameters to build a part number:
Part Numbering Guide
Electrical Parameters
| Parameters | Units | Min | Typical | Max | Remarks |
|---|---|---|---|---|---|
| Frequency Range | MHz | 5 | 100 | ||
| Frequency Tolerance at +25ºC | ppb | -100 | +100 | ||
| Freq. Stability vs. Op Temp. | ppb | -10 | +10 | See part numbering guide for options. | |
| Freq. Stability vs. Supply Voltage | ppb | -5 | +5 | VDD±5% Change | |
| Freq. Stability vs. Load | ppb | -5 | +5 | ±10% Change | |
| Freq. Stability vs. Aging/Year | ppb | ±50 | ±300 | AT-Cut : ±300/Year, SC-Cut : ±50/Year | |
| Operating Temperature | °C | -40 | +70 | See part numbering guide for options. | |
| Storage Temperature | °C | -45 | +85 | ||
| Supply Voltage (VDD) | V | VDD-5% | VDD | VDD+5% | See part numbering guide for options. |
| Power Consumption At Turn On | W | 6.0 | |||
| Power Consumption At 25°C | W | 2.0 | |||
| Control Voltage (VC) | V | 0.0 | 5.0 | ||
| Control Middle Voltage | V | 2.5 | |||
| Pullability (AT-Cut) | ppm | ±2.0 | AT-Cut | ||
| Pullability (SC-Cut) | ppm | ±0.5 | SC-Cut | ||
| Linearity | % | 10 | |||
| VC Input Impedance | KΩ | 50 | |||
| Deviation Slope | Positive | ||||
| Output Logic (SINEWAVE) Load | Ω | 50 | |||
| Output Logic Waveform | dBm | 7 | |||
| Output Logic Spurious (Harmonic) | dBc | -30 | |||
| Output Logic Spurious (Non-Harmonic) | dBc | -70 | |||
| Reference Voltage Output (Vref) | V | 5 | |||
| Symmetry (Duty Cycle) | % | 45 | 50 | 55 | |
| Start-Up Time | ms | 3 | |||
| Warm-Up Time | ppb | -50 | 50 | At 25°C After 5Mins. |
Outline Drawing & Recommended Landed Pattern
All dimensions are in millimeters (mm) unless otherwise noted. Drawings are not to scale.
